Bear Glass

Below is a list of all our available clear glass sheets that can be used for back painted glass

*we can also back paint acid etch glass, please view our acid etch page* include link to acidetchglass.com

Shapes
Below are some of the many shapes you may select from for your mirror needs:

(picture was taken from another site, we should create our own version using similar shapes)

If the shape you need is not displayed we can probably still create it for you;

Please contact us to verify that we can cut the shape you desire with either a drawing, picture or diagram of the shape. A pattern is required before we can cut the glass for you. This pattern is usually created from paper, wood and/or cardboard.

Fabrication Page:
we offer the following types of fabrication to accommodate for the many applications of glass:

• Cutting by Hand
• Notches
• Etching
• Drilled Holes
• Silvering Booth
• Drilling
• Glue Chipping
• Cutouts (Examples: light switches, electrical outlets, telephone jacks)
• Finger Pulls
• Sandblasting
• beveling
• miter
• V-groove
• Polish
• Silver leaf
• laminate
• installation

Edgework
This is the shaping or finishing of the edges of a glass surface, usually by grinding with an abrasive wheel. Pencil Polished edge in a Satin finish (also available in clear finish) is the most common type of edgework on mirrors. Although this is not as common on mirrors as it is on glass. Beveled edges can also be applied to any of these edge finishes. See the Beveling section

 

Beveling
This is the production, by abrasion, of a sloping edge on the glass sheet which is commonly used on mirror glass. Beveling of mirror edges creates a very elegant and lavish appearance. It is often used for wall and vanity mirrors. The beveling process uses diamond grinding wheels to remove a portion of the glass edge and then uses felt wheels and polishing compound to bring the edge to a shiny clear finish once again. The finished look can really enhance the overall appearance of any project that uses glass or mirror.